azimuth (default name: rf_azimuth)

The azimuth of a roofpart in degrees

extrusion_mode (default name: rf_extrusion_mode)

Indicates what extrusion mode was used for the building. standard: the regular LoD 1.2, 1.3 or 2.2 extrusion. lod11_fallback: all geometry was substituted with an LoD 1.1 extrusion. skip: no 3D geometry was generated

force_lod11 (default name: rf_force_lod11)

Indicates if LoD 1.1 extrusion was forced for the building

h_ground (default name: rf_h_ground)

The elevation of the floor of the building

h_pc_98p (default name: rf_h_pc_98p)

The 98th percentile elevation of the building pointcloud

h_roof_50p (default name: rf_h_roof_50p)

The 50th percentile roof elevation

h_roof_70p (default name: rf_h_roof_70p)

The 70th percentile roof elevation

h_roof_max (default name: rf_h_roof_max)

The maximum roof elevation

h_roof_min (default name: rf_h_roof_min)

The minimum roof elevation

h_roof_ridge (default name: rf_h_roof_ridge)

The main ridge elevation

is_glass_roof (default name: rf_is_glass_roof)

Indicates if a glass roof was detected

is_mutated (default name: rf_is_mutated)

Indicates if the building was mutated between multiple input pointclouds (if multiple input pointclouds were provided)

nodata_frac (default name: rf_nodata_frac)

Indicates fraction (in the range [0,1]) of the roofprint area that is not covered by pointcloud data

nodata_r (default name: rf_nodata_r)

Indicates the radius of the largest circle in the roofprint that is not covered by pointcloud data

pc_select (default name: rf_pc_select)

Indicates why the input pointcloud was selected for reconstruction. Only relevant if multiple input pointclouds were provided

pc_source (default name: rf_pc_source)

Indicates which input pointcloud was used for reconstruction

pc_year (default name: rf_pc_year)

Indicates the acquisition year of the selected input pointcloud

pointcloud_unusable (default name: rf_pointcloud_unusable)

Indicates if the pointcloud was found to be insufficient for reconstruction

pt_density (default name: rf_pt_density)

Indicates the point density inside the roofprint

reconstruction_time (default name: rf_t_run)

Reconstruction time in milliseconds

rmse_lod12 (default name: rf_rmse_lod12)

The Root Mean Square Erorr of the LOD12 geometry

rmse_lod13 (default name: rf_rmse_lod13)

The Root Mean Square Erorr of the LOD13 geometry

rmse_lod22 (default name: rf_rmse_lod22)

The Root Mean Square Erorr of the LOD22 geometry

roof_n_planes (default name: rf_roof_planes)

The number of roofplanes detected in the pointcloud (could be different from the generated mesh model)

roof_n_ridgelines (default name: rf_ridgelines)

The number of ridgelines detected in the pointcloud (could be different from the generated mesh model)

roof_type (default name: rf_roof_type)

Roof type. Can be no points, no planes, horizontal, multiple horizontal, or slanted

slope (default name: rf_slope)

The slope of a roofpart in degrees

success (default name: rf_success)

Indicates if processing completed without unexpected errors

val3dity_lod12 (default name: rf_val3dity_lod12)

Lists val3dity codes for LoD 1.2 geometry

val3dity_lod13 (default name: rf_val3dity_lod13)

Lists val3dity codes for LoD 1.3 geometry

val3dity_lod22 (default name: rf_val3dity_lod22)

Lists val3dity codes for LoD 2.2 geometry

volume_lod12 (default name: rf_volume_lod12)

The volume in cubic meters of the LoD 1.2 geometry

volume_lod13 (default name: rf_volume_lod13)

The volume in cubic meters of the LoD 1.3 geometry

volume_lod22 (default name: rf_volume_lod22)

The volume in cubic meters of the LoD 2.2 geometry